For the all-season tires tested, manufacturers’ tread-wear ratings (the Uniform Tire Quality Grades found on a tire’s sidewall) range from 520 to 740. Theoretically, a tire with a UTQG grade ...

Is A Higher Tire Treadwear Number Better? The UTQG treadwear rating system starts with a control tire that has been assigned a grade of 100 after being driven a distance of 7,200 miles on a test ...

For the all-season tires we tested, manufacturers’ tread-wear ratings (the Uniform Tire Quality Grades found on a tire’s sidewall) range from 520 to 740.

This is why you should look beyond a simple load rating when hunting for a set of tires for your truck. Note: the 115 number of the 118/115Q is the load index number in dual rear wheel configurations.

The tires also have to be worn out, which is defined as having a tread depth of only about 2⁄32 of an inch. Tires that are worn out will perform poorly on wet roads and could pose a safety risk.

Selecting the correct tire tread more difficult than you might think. Region, fuel efficiency, weight, miles traveled, etc. should all be considered.

The tire tread depth is the measurement between the groove (the gap between the patterned rubber) and the top of the tire tread. For new tires, this depth is usually 10/32 or 11/32 inches (8 or 9 mm).

The Tire Rack concluded that with 2/32 inch of tread depth left, there's simply not enough area for water to be evacuated by a tire, resulting in increased stopping length due to hydroplaning. Of ...

Tyrata, a tire sensor and data management company, recently expanded its IntelliTread tire tread wear sensor platform to include a low-profile drive-over system. The IntelliTread Drive-Over-System ...

FRESNO, Calif. (KFSN) -- Low tread depth on car tires can be a factor when it comes to hydroplaning, so what's a quick way to check your tread? "Because your tire pressure is directly correlated ...

The tire treadwear rating is based on a standard that uses a control tire with a score of 100. Most tires' ratings are 200 to 500. A high number is better.