Smoke machine:** - Vape - Air pump - Plastic/silicone tube - Liquid container - T/L connectors (for the tubes) **Other ...

Quick note: ATmega based Arduino boards (UNO, Nano, Mini, Mega) takes about 100us to read an analogue input, so the maximum reading rate is about 10,000 times second. Below you can see a “CIE1931 Fade ...

This was helped further thanks to the use of transistors to run the LEDs directly from battery voltage, rather than obeying the current limits of the Arduino Nano’s output pins.

A simple, LED indicator with RGB/HSV control via a single control pin, all using LEDs from off-the-shelf LED strips with 3D-printed holders.

Download the codes here Arduino simple shield potentiometer code: Arduino shield rc car: Arduino nano module L298P code: ...

The Arduino Nano is programmed to control the frame’s components, which include LEDs and a vibrating motor. These components work together to create the slow-motion effect.

Fancy making a cool looking magnetic levitating lamp? Check out this Arduino Nano-based project that combines a magnet and LEDs.

Arduino Maker Nano RP2040 “Slightly shorter than a Pico, this board has 30 pre-soldered pins, all helpfully labelled on the silkscreen.

The power of Espressif’s ESP32-S3 meets Arduino’s unmatched customer experience, documentation and community — all in the compact form factor of the Nano. Provides support for both ...

An Arduino Nano, soldered to a protoboard, was used to drive the LED strips with a USB battery pack powering the whole project.